TG160160C-01 V00 SPEC 2010-08-04

1、160x160 dot-matrix

2、FSTN/Transmisstive/Positive/B-W 3、Backlight: White /side light

4、Operating Temp.: -20℃～+70℃ 5、1/160 duty cycle, 1/12 Bias

6、Built-in Controller（UC1698 or equivalent） 7、Viewing angle: 6 o’clock

Electrical Characteristic： ( VSS=0V, Ta = 25℃)

Parameter Supply voltage for logic Supply current for logic

Symbol

Condition

MIN

TYP

MAX

Unit

VDD -- 2.8 3.03.2 V

IDD -- -- 3 -- mA

-20℃ -- -- -- V

Operating voltage for LCD VLCD +25℃ -- 16.0-- V

Absolute Maximum Rating：

+70℃ -- -- -- V

Supply voltage for Backlight

VBL -- -- 3.3

-- V

Item Power supply

for logic Input voltage

Symbol

Standard value MIN TYPMAX

4.0

Unit V

Supply current for BacklightIBL -- -- 45 -- mA

VDD-VSS -0.5 --

VI -0.5 -- VDD +0.5 V

Interface Pin Connections：

Pin No.Symbol Level Description Interface Pin Connections： Pin No. Symbol Level Description 1 VLCD 0V High voltage LCD Power Supply. 2 VS+ H/L LCD SEG driving voltages. These are the voltage sources to provide SEG driving currents. These 3 VS- H/L voltages are generated internally. Connect capacitors of CBX value between VBX+ 4 VB0+ H/L and VBX- capacitor of CS value between VS+ VS- The resistance of these traces directly affects the 5 VB1+ H/L driving strength of SEG electrodes and impacts the image of the LCD module. Minimize the trace 6 VB1- H/L resistance is critical in achieving high quality 7 VB0- image. Supply voltage for logic operating. 8 VDD +3.3V The ground of power. 9 VSS 0V 10-11 WR0-WR1 H/L WR (1:0) control the read/write operation of the host interface.See section Host Interface for more detail. Selects Control data or Display data for read/write 12 CD H/L opoeration.”L:Control data “H”:Display data 13 CS0 H/L Chip Select When RST=”L”, all control registers are re-initialized by 14 RESET H/L their default states. 15-22 DB0～DB7 H/L 8-bit bi-directional data bus. VER. V00 2010-08-04 WWW.TINSHARP.COM